Hybrid Gas Density Monitor 8782 – Hybrid Gas Density Monitor

Mechanical and electronic monitoring


  • Exact switching following isochore at all temperatures
  • No contact bouncing
  • Independent, galvanically separated circuits
  • Continuous analogue output signal for gas density
  • Long term drift free output signal
Product request


This is a mandatory field
Please enter your email address!
CAPTCHA image for SPAM prevention If you can't read the word, click here.

Technical Data


High voltage switchgear


Hybrid gas density monitors

Accuracy @ 25°C typ.

± 0.5 % FS typ.
± 0.3 % FS typ.

Dielectric strength

Microswitch: 2 kV terminal ground
Output signal sensor: 250V against mass (EN60255-5)

Measuring principle

Mechanical monitoring: Principle: Reference gas measurement
Electronic monitoring: Principle: Oscillating quartz measurement

Approval / conformity

ATEX / IECEx, according to the norm
EN/IEC 60079-0/EN 60079-11/
EN 60079-26/ EN 50303


At min. 5 kPa distance from switch point no contact bouncing
under 20...100 Hz: 4 g

NLH @ 25°C (BSL) typ.

± 0.3 % FS typ.
± 0.1 % FS typ.

Pressure connections

G1/4" m, G1/4" m (Manom.), G1/4" f, G1/2" m, G1/2" m (Manom.), R1/4" m, 1/4"NPT m, M18x1.5 m

Media temperature

-40°C ... 80°C


50g/ 8 ms

Electrical connections

EN175301-803-A; M12x1; MIL-C 26482; Binder 723; Cable

Long term stability 1 year typ.

± 0.2 % FS typ.
± 0.2 % FS typ.

Ambient temperature

-40°C ... 80°C



Output signal

Mechanical monitoring: floating change-over contact
Electronic monitoring/sensor: analogue: 6.5...20 mA current loop
Output signal 6.5...20 mA
current loop 0...0.85MPa absolute SF6 @ 20°C 0...56.1 kg SF6 /m3

TEB typ. @ -25 ... +85°C

± 2.0 % FS typ.
± 0.5 % FS typ.

Measuring range

Mechanical monitoring, measuring range absolute: 0...1.1 MPa (0...1100 kPa)
Electronic monitoring/sensor, measuring range absolute: 0...0.85MPa SF6 @ 20°C 0...56.1 kg SF6 /m3


1.4435, 1.4404, 1.4571 (AISI316L, AISI316)

Hybrid Gas Density Monitor 8782 - Hybrid Gas Density Monitor